Increase Wireless(WiFi) Coverage With an Empty Beer Can



Aluminum foil can be used to increase the strength of your wi-fi signal. This was done with a curved foil placing behind the antenna to direct the signal to the desired direction. This was the cheapest method to boost your Wi-Fi Signal. You can also try out the new method with the empty Coke/Pepsi/Soda cans available at your home.  This gives more signal compared to the Aluminium foils. Follow the instructions and you can enjoy a different Wi-Fi experience


  • Cut the top off an empty soft drink can with a cutter.
  • Rinse out the can thoroughly with water and dry it with paper/cloth.
  • Mark and then punch a hole for Wi-Fi router/AP’s antenna  from the bottom of the can and one inch from the top.
  • Place the pieces of duct tape over the rough edges of the top portion of the can.
  • Insert your Wi-Fi antenna router in the square hole you made near the bottom of the can.

CHECK THE PICTURES BELOW






Share this Post Share to Facebook Share to Twitter Email This Pin This Share on Google Plus Share on Tumblr

Gadgets and Tech News © 2014. All Rights Reserved | Powered By Akillzhere | Windows Team

Designed by-SpeckyThemes